强光照和黑暗条件下刺参体壁的基因表达差异     

张立斌  冯其明  孙丽娜  房燕  徐冬雪  张涛  杨红生 《海洋学报(英文版)》2018,37(5):54-66

参对光照变化非常敏感，研究刺参对光照的分子响应非常重要。本研究应用RNA测序获取了刺参暴露于强光（“强光”）、正常光照（“对照”）和完全黑暗（“黑暗”）环境下体壁的基因表达谱情况，通过“对照”与“黑暗”，“对照”与“强光”和“黑暗”与“强光”的比较，在|log₂ ratio|≥1和FDR≤0.001的标准下分别发现了1161、113和1705个差异表达基因（DEGs）。基因本体分析表明，“cellular process”和“binding”在“生物过程”和“分子功能”类别中的DEGs富集最多，而“cell”和“cell part”在“细胞组分”类别中的DEGs富集最多。将DEGs与Kyoto Encyclopedia基因和基因组数据库上的于214、41和229条通路进行比对，发现了51、2和57条通路分别显著富集。本研究发现的光特异性DEGs可作为深入研究刺参对光照变化的生化适应机制的重要目标基因。  相似文献   

广盐性鱼类渗透压适应性与生理可塑性机制研究     

马爱军  崔文晓  刘志峰  张金生  黄智慧  杨双双  刘晓菲  杨凯  张薇 《海洋与湖沼》2018,49(6):1308-1317

拥有强大的渗透压调节能力对广盐性鱼类的生存至关重要。目前,关于鱼类渗透压调节机制已有不少研究,但均存在较大的局限性。本文从广盐性鱼类渗透压信号转导机制、渗透胁迫的细胞调控机制、渗透调控的内分泌调节机制和无机离子通道和转运蛋白介导的渗透调控等方面对广盐性鱼类的渗透压适应性和生理可塑性机制进行分析,以期从分子、细胞、通路和生理等层次初步探索广盐性鱼类盐度胁迫后的可塑性表型变化和不同盐度条件下的应答机制,为广盐性鱼类的渗透压调节机制的深入研究奠定基础。对广盐性鱼类渗透压适应性与生理可塑性机制研究,有助于研究其环境适应机理,促进野生鱼种的人工化养殖以及新品种的育种从而提高经济效益、社会效益和生态效益,对促进水产养殖学进步以及养殖业的发展具有重要意义,同时,为研究广盐性鱼类的渗透压调节机制开辟新的研究方向。  相似文献   

双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件   总被引：4，自引：0，他引：4  

阳元娥  罗发兴  黄强  谭伟 《广东海洋大学学报》2004,24(4):49-53

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右  相似文献   

Plane Symmetric Domain Wall in Lyra Geometry     

Anirudh Pradhan  I. Aotemshi  G.P. Singh 《Astrophysics and Space Science》2003,288(3):315-325

In this paper general solutions are found for domain walls in Lyra geometry in the plane symmetric spacetime metric given by Taub. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. It is also shown that the results obtained by Rahaman et al [IJMPD, 10, 735 (2001)] are particular case of our solutions. Finally, the geodesic equations and acceleration of the test particle are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

THERMAL EFFECTS OF BUILDING′S EXTERNAL SURFACES IN CITY——Characteristics of Heat Flux into and out of External Wall Surfaces     

ZHANG Yi-ping  HE Yun-ling    LIU Yu-hong  MA You-xin  LI You-rong  DOU Jun-xia     《中国地理科学(英文版)》2004,(4)

1INTRODUCTIONWiththerecentmodernizationandurbanizationofChi-na,urbanareashavegreatlyincreased, andgiantbuild-ings,especiallythosetallerthan100m,havebeendomi-nantincities,whichhave resultedinthegreatincreaseintheproportionofbuilding'sexternalsurfacetototalurbanarea.Thedifferencesofthermalpropertiesmain-lyinducedbysolarradiationbetweenbuilding'sexter-nalsurfacesareobviousfordifferentexposures,whichcaninevitablyinfluencethedistributionsofairtempera-turenearby,eventheverticaldistributionsofurb…  相似文献   

MORPHOLOGICAL AND FUNCTIONAL STUDIES ON THE EPIDERMAL CELLS OF AMPHIOXUS (BRANCHIOSTOMA BELCHERI TSINGTAUENSE) AT DIFFERENT DEVELOPMENTAL STAGES     

毛炳宇  孙晓阳  张红卫  张士璀  吴贤汉 《中国海洋湖沼学报》1997,(3)

ImODUcrroNTheVertchrateepidennisisinintirnatecontaCtwiththeenvironmentandre~environmentaladaptions.TheepidermisofterreStrialanbolsiskeratinedwhilethatofamPhibiousandaquaticfonnsisrelataltomucus-produCti0n.Theepidennisadsasafi-nalbatherbetweentheorganismanditsenvironmentandoneofitSrnainfunCtionsistoproteCttheorganismagainstextemalpathogens.lnadditiontoIneCanicalproedonofthebody,theepidertnisofamPhibiansandfishescansededinsandotherantibacterialpeptidesthathelpinthebonedefenSeoftheanhal(Su…  相似文献   

Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays     

Gert Finger  Reinhold J. Dorn  Alan W. Hoffman  Hamid Mehrgan  Manfred Meyer  Alan F. M. Moorwood  Joerg Stegmeier 《Experimental Astronomy》2002,14(2):117-127

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

CHARACTERIZATION OF LACTATE DEHYDROGENASE ISOZYME PATTERN AND MORPHOLOGY OF THREE MARINE FISH CELL LINES     

郭华荣  张士璀  李红岩  童裳亮  相建海 《中国海洋湖沼学报》2002,20(3):226-231

Three continuous marine fish cell lines of FG (i. e., Hounder Gill) from flounder (Paralichthys olivaceus) gill, SPH (i. e. , Sea Perch Heart) from sea perch (Lateolabrax japonicus) heart and RSBF (i.e., Red Sea Bream Fin) from red sea bream (Pagrosomus major) fin, were characterized by lactate dehydrogenase (LDH) isozyme and morphological analysis. The LDH isozyme patterns of these three cell lines and their corresponding tissues of origin were investigated and compared. The results showed: (1) No difference was found in the LDH isozyme patterns of FG and flounder gill tissue. However, the LDH isozyme patterns of SPH and RSBF were significantly different from their corresponding tissues of origin; (2) LDH isozyme patterns of FG, SPH and RSBF were markedly different from each other and could serve as genetic markers for species identification and detection of cross contamination. Morphological change analysis of these three cell lines in comparison to their original tissues indicated that FG cells still appeared epithelioid without morphological transformation. However, morphological changes were found in SPH and RSBF compared to their original tissues. Therefore, the cellular morphology was still plastic in the relatively stable culture conditions, and it was possible that change of LDH patterns wasrelated to morphological changes of fish cells in vitro.  相似文献   

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach     

A. T. C. Goh  F. H. Kulhawy 《国际地质力学数值与分析法杂志》2005,29(6):627-642

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements     

Ahmet Şenol  Mustafa Aytekin 《Geotechnical and Geological Engineering》2008,26(3):313-321

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.  相似文献